Danger - Corrosive: Causes eye and skin burns. Contents under pressure. Read carefully other cautions on back panel. Cautions: Irritating to respiratory system. May cause central nervous system disorder (e.g. narcosis involving a loss of coordination, weakness, fatigue) and/or damage. May cause delayed lung damage. Intentional misuse by concentrating and inhaling the product can be harmful or fatal. Prolonged inhaling may be harmful. Do not get this material in contact with eyes, skin or clothing. Note: Product is not required to be labeled as flammable as described in 16 CFR 1500.3 and 1500.45. Keep away from heat, sparks, and flames. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120 degrees F (49 degrees C) as container may burst. Avoid prolonged exposure to sunlight. Use with adequate ventilation. First Aid: Eyes: Immediately flush with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Get medical attention immediately. Skin: Immediately flush with plenty of water. Remove and isolate contaminated clothing and shoes. Get medical attention immediately. Inhaling: Move to fresh air. Oxygen or artificial respiration if needed. Do not use mouth-to-mouth method if with inhaled the substance. Ingestion: Rinse mouth. Do not induce vomiting without medical advice. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Do not use mouth-to-mouth method if victim ingested the substance. Keep out of reach of children. Contains: sodium hydroxide and butyl carbitol. Contains no ozone depleting chemicals. 24 hour medical emergency 1-866-836-8855.

Read entire label carefully before using product. Not for use on stainless steel. This effective cleaner is safe to use on porcelain, glass, ceramics, and cast iron surfaces. Keep spray or dripping away from the pilot lights, electrical connections, switches, receptacles, thermostats, heating elements, light bulbs, and other surfaces which might be affected by caustics. Avoid contact with painted or varnished surfaces, clothing, floor tile, linoleum, plastics, chrome, copper, aluminum, and coppertone surfaces. Not for use on self-cleaning or continuous cleaning ovens. Place newspaper under oven door to protect floor. Wear rubber gloves to avoid skin contact. 1. Use on empty oven, either cold or pre-heated to 200 degrees F and turned off. Turn off pilot light and/or electric switch. 2. Hold can upright and point spray button away from face. Shake well, then spray inside of oven from a distance of 8 to 12 inches, giving it an even coating. 3. Spray top and bottom of oven first; then spray remaining oven surfaces and allow to stand about 30 minutes. (May be left on overnight with oven door closed). 4. Wipe oven clean with damp cloth, sponge, or paper towel. Spots that are difficult to remove should be retreated and cleaned with a scouring pad. Rinse with potable water. 5. When clean, re-ignite pilot light, or turn on electric switch, and heat oven to 400 degrees F for 10 minutes before using with food again.

SPRAYWAY